Mitsubishi Electric 700 Series Training Manual page 172

4. Edit Screens
■ Full-screen display (full-screen display mode is ON)
< Drawing area >
(3)
(9)
(6)
Display items
Display item
(1) Check counter
(2) Display mode
(3) 2D drawing area
(4) Scale
(5) Machining time display
(6) G modal display for check This displays the following modals.
(7) Input area
This displays the axis counter for the check drawing. The displayed counter type and
axis name (3 axes) are set in the parameters.
[Counter]
#1231 set03 (bit5) 0: Machine position counter,
1: Workpiece coordinate position counter
[Axis name]
#1026 to #1028 base_I, base_J, base_K
(Note) When the setting values of #1026 to #1028 have been changed, the changed
values will be reflected in the check counter display when the power is
turned ON again.
This shows the plane for drawing.
This is the area where the tool path is drawn when performing a program check.
The drawing viewpoint can be moved, and the drawing size can be enlarged and
reduced.
Select the zero point to be displayed with following parameter:
#1231 set03/bit4
This shows the display range scale. Use
change the scale value.
This calculates and displays the machining time.
• Absolute/incremental (G90, G91: Group 3)
• Operation mode (G00, G01, G02, G03 etc.: Group 1)
• Tool radius compensation (G40, G41, G42: Group 7)
• Fixed cycle (G80, G81 etc.: Group 9)
This displays details of the key input when setting the scale value and display axis
name.
Press the menu Display range ,
164
4.3 Program Check (2D)
Details
0:Basic machine coordinate system zero point
1:Workpiece coordinate system zero point
Zoom in
Display mode keys to display the input area.
(1)
(5)
(8)
(2)
(4)
or Zoom out menu to