Mitsubishi Electric 700 Series Training Manual page 54

2. Monitor Screens
Menus
Menu
This displays the currently executed position
Relat
posn
This displays the G54 to G59 workpiece coordinate system modal No.
Work
and the workpiece coordinate position in that workpiece coordinate
co posn
system.
This displays the coordinate position of each axis in the basic machine
Machine
coordinate system having a characteristic position, specified by the
posn
machine, as a zero point.
This displays the remaining distance of the movement command
Remain
being executed during automatic start or automatic halt. (The
command
remaining distance is the incremental distance from the current
position to the end point of that block.)
This displays the details of the command in the block executed after
Next
the block currently being executed.
command
This displays the amount moved with the manual mode while the
Manual
manual absolute switch was OFF.
int amt
This displays the value obtained by subtracting the tool compensation
Program
amount compensated for that axis from the position actually being
posn
executed for each axis.
This closes the pop-up window and quits this function.
Close
This displays the position of the tool end from the workpiece
Tip wk
coordinate reference point in the selected workpiece coordinate
posn
system.
This displays the position of the tool end from the machine coordinate
Tip
system reference point in the machine coordinate system.
machine
This displays the amount moved in the selected axis direction using
the manual pulse generator in the hypothetical machine coordinate
system.
Pulse
Basically this is updated only when manual ABS is OFF. If "#7905
NO_ABS" is set to "1", this will be updated regardless of the manual
ABS ON/OFF.
(Note 1) The type of counter displayed first when the pop-up display appears is the relative position. If the
5-axis related option is ON, the counter will be the "Tip wk posn".
The counter which appears next is the type selected previously.
(Note 2) The menus Tip wk posn, Tip machine and Tip axis movement appear when the 5-axis related
option is ON.
Details
46
2.8 Counter All-axis Display
Type
B
B
B
B
B
B
B
C
B
B
B