Mitsubishi Electric 700 Series Training Manual page 197

4. Edit Screens
Setting the tool color (CL)
Set the tool color for each tool.
(1) Use the cursor keys to move the cursor to
the tool color setting column.
(2) Press the tool color menu.
(Ex.) Menu
It is also possible to set input values.
0 INPUT : Default color
1 INPUT : Gray
2 INPUT : Red
3 INPUT : Yellow
4 INPUT : Blue
5 INPUT : Green
6 INPUT : Light blue
7 INPUT : Purple
8 INPUT : Pink
(Note) The tool appears in red when the default color is designated.
Green
The cell where the cursor is located appears in green.
The cursor moves to the tool number column one line below.
189
4.4 Program Check (3D)