Editing A Machining Program - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.2.2 Editing a Machining Program

Operation method
(1) Press the
Open
Memory HD
(2) Select a device.
(Ex.) Menu
(3) Use the ↑ , ↓ , ↑ , ↓
the cursor with target machining program.
The name of the machining program to be
edited can be input in the input area.
(4) Press the
INPUT key.
(5) Edit a machining program.
(6) Press the
INPUT key.
(Note 1) An error occurs if a
(Note 2) If the selected program is running or program restarting, it can be displayed but not edited.
An error occurs when the data is set or the INPUT key is pressed.
(Note 3) The fixed cycle program list displays when basic common parameter "#1166 fixpro" is set to "1".
(Note 4) Editable size differs depending on each device. When the editable size is exceeded, the
message "Can't edit because of size over" appears.
(Note 5) "Loading" is displayed in flickering until the file is opened.
(Note 6) Editing is not possible for a program with 33 or more file name characters.
menu.
Memory
card
Memory
keys to align
nonexistent program No. is set.
The following menu appears.
The list appears as a pop-up window.
DS FLD
The selected device name and directory (memory:
/program) appear in the Device name, Directory display
column.
For the devices other than memory, root directory is
selected.
The program appears at the top if the file can be opened.
The cursor moves to the head character of the program. The
mode enters the overwrite mode.
The list display is closed.
"
Refer to 4.2.6 Edit Operations
The edited machining program is saved to the device.
148
4.2 Program Editing
List Sort
Close
update change
"
and later.