Deleting Data - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.2.11 Deleting Data

Operation method (Deleting one character)
(1) Move the cursor to the character to be
deleted.
(2) Press the
DELETE
(3) Press the
INPUT
Operation method (Deleting one line)
(1) Move the cursor to the line to be deleted.
(2) Press the
C.B
(3) Press the
INPUT key.
(Note 1) In the case where the block for the deleted line covers multiple lines, these lines are also
deleted.
(Note 2) Last line only with "%" cannot be deleted.
key.
key.
key.
1 character is deleted at the cursor position, and
appears. The data from the cursor position moves to the left.
When this key is held down, the characters can be deleted
one at a time.
The edited machining program is saved to the device and
" "
Editing disappears.
1 line is deleted at the cursor position, and
appears. The lines following the cursor position are shifted
upward. The cursor position does not change.
When this key is held down, the line can be deleted one at a
time.
The edited machining program is saved to the device and
" "
Editing disappears.
155
4.2 Program Editing
"
Editing
" "
Editing
"