Selecting A Device, Directory And File - Mitsubishi Electric 700 Series Training Manual

6. Maintenance Screens

6.2.2 Selecting a Device, Directory and File

File selection sequence
Designate the device where the target file is located. Select from the sub menu.
Designate the directory with a full path.
Designate the file name.
Menu used
Device select menu's submenus
Menu
This selects the NC memory (program, parameter, user PLC, NC
Memory
data).
This selects the hard disk.
HD
This selects the RS-232C device (PC, tape, etc.).
Serial
This selects the front IC card.
Memory
card
This selects the NC compact flash memory.
DS
This selects the Ethernet-connected host computer.
Ethernet
This selects the floppy disk.
FLD
Dir (other than memory) and File name menu submenus
Menu
The cursor appears in the list display. The list contents can be
selected with the INPUT
When a directory is selected, the contents of the selected directory
From
are displayed in the list. Continued selection is possible.
list
When a file name is selected, the file name is temporarily displayed in
the input area. When the INPUT key is pressed again, it is fixed.
Details
Details
key.
244
6.2 Input/Output Screen
Input the full path or select from the list.
Input the file name or select from the list.
Type
C
C
C
C
C
C
C
Type
A
Reference
-
-
-
-
-
-
-
Reference
-