Screen Configuration - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen
3. Setup Screen
The setup screen is used to make tool and workpiece related settings, set user parameters, edit the MDI, set
the counter, and perform manual numerical value commands.

3.1 Screen Configuration

The setup screen is configured as shown below.
(1)
(2)
(3)
Display items
Display item
(1) Counter display
(2) M,S,T,B Command
(3) Spindle/Wait display
This displays the relative position and machine position counter.
Up to 5 axes can be simultaneously displayed.
The following status symbols display if each of the axes are in a set position or status.
#1 to 4 : Reference position 1 to 4
][ : Servo OFF status
MR : Mirror image
>< : Axis removed
It is possible to set whether to consider the tool length and diameter compensation
using parameter " #1287 ext23/bit4 " .
This displays all command values for M (support function command value), S (spindle
command rotation speed), T (tool command value) and B (No. 2 support function
command value). The spindle command rotation speed displays up to the No. 2
spindle.
The presence (absence) of the No. 2 support function command value is designated
using parameter " #1170 M2name " .
Refer to "3.11 Manual Numerical Value Commands" for details.
The current spindle tool number and standby tool number can be displayed according
to the PLC program specifications. (The numbers do not display in the screen if not
created with the PLC program.)
The contents of this display differ based on the machine tool builder specifications.
83
3.1 Screen Configuration
Details