Checking One Block At A Time - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.3.2 Checking One Block at a Time

Operation method
(1) Press the main menu Check .
Press the menu 2D check
the program check (3D) appears.
(2) A check search is performed using the
same method as for " 4.3.1 Checking
Continuously " .
(3) Press the menu Check step .
The program check screen becomes active.
key when
The program check is executed for one block, and a graphic
drawing of the machining program movement path is made.
The check counter display is updated.
The check G modal display is updated.
<State during one block check>
<State when one block check is completed>
168
4.3 Program Check (2D)