Mitsubishi Electric 700 Series Training Manual page 126

3. Setup Screen
Operation method (Erasing one line of tool life management data)
(1) Move the cursor to the line to be erased.
(2) Press the menu Line clear
INPUT keys.
(3) Press the
Y or
Press a key other than
in order not to erase the data.
Operation method (Designating and erasing the multiple lines) (L system)
(1) Press the menu Line clear .
(2) Set the erasing range by marking the first
and last # Nos. with a "/", and press
INPUT key.
122/125 INPUT
(3) Press the
Y or
Press a key other than
in order not to erase the data.
(Note) If the INPUT key is pressed without setting a # No., the line at the cursor is erased.
and
INPUT key.
Y or INPUT
INPUT key.
Y or INPUT
3.5 Tool Life Management
The menu is highlighted.
A message displays confirming whether it is okay to erase
the data.
The background color of the area to be erased changes to
light blue.
One line of the selected life management data is erased and
the menu highlight returns to normal.
The next line moves up after erasing.
The menu is highlighted.
A message displays confirming whether it is okay to erase
the data.
The background color of the area where the data is erased
changes to light blue.
The tool life data corresponding to the designated # No. is
erased, and the menu highlight returns to normal.
The next line after the erased range moves up.
118
(L system)