Mitsubishi Electric 700 Series Training Manual page 62

2. Monitor Screens
Operation method (Setting the origin)
(1) Press the main menu
(2) Input 0, and then press the INPUT key.
If the INPUT key is pressed without
inputting a value, zero (0) will be set.
(Origin zero)
(3) Repeat step (2) for each axis.
For axes that are not to be operated, press
the ↓ key and move the cursor.
(Note) An error will occur if a value other than 0 is set.
Operation method (Canceling the origin)
(1) Press the main menu G92 set , and then
press the menu Origin cancel .
(2) Press the
INPUT key.
(3) Repeat step (2) for each axis.
For axes that are not to be operated, press
the ↓ key and move the cursor.
. The relative position counter opens as a pop-up window.
G92 set
The menu Origin set
The cursor appears at the No. 1 axis of the relative position
counter.
"0.000" appears at the cursor position.
The cursor moves to the next axis.
The pop-up window closes when the origin has been set for
the last axis.
The relative position counter opens as a pop-up window.
The menu Origin cancel is highlighted.
The cursor appears at the No. 1 axis of the relative position
counter.
The same value as the machine position appears at the
cursor position.
The cursor moves to the next axis.
The pop-up window closes when the origin has been
canceled for the last axis.
54
2.12 Origin Set, Origin Cancel
is highlighted.