Changing The Parameter Display; Setting The Parameters - Mitsubishi Electric 700 Series Training Manual

6. Maintenance Screens

6.1.1 Changing the Parameter Display

Changing to the computer link parameters
(1) Press the menu change key until the menu
Link param appears.
(2) Press the menu Link param .

6.1.2 Setting the Parameters

The method of setting the parameters is explained in this section. For the setting range of each parameter,
Press the menu key to select the parameter screen, and select the data to be set with the cursor key.
"8201 Axis removal" Setting Y1 axis to "1"
(1) Press the menu Axis param .
(2) Use the
,
move the cursor to the position to be set.
The cursor can also be moved with the
menu Param No. .
Refer to "6.2.2 Selecting the parameter
No.".
(3) Input the value.
1 INPUT
, and keys to
The menu Link param
The computer link parameters appears.
The menu Link param is highlighted.
The cursor moves to the position of the setting target data.
The current setting value is displayed in the input area.
The setting value appears, and the cursor moves.
235
6.1 Parameter Screens
appears.