Mitsubishi Electric 700 Series Training Manual page 114

3. Setup Screen
Menus (M system/L system)
Menu
Creates a new group and adds the group No. to the list.
Group
regist
This erases all of the tool life management data included in the
Group designated group No.
delete
If the group No. is not designated, the tool life management data for
the group No. indicated by the cursor will be erased.
This erases all groups and their tool life management data registered
Grp all
delete in the part system which is currently selected.
Changes the group No..
Group Specify a new group No. and press the
change
group No. and then change the contents of the list.
An error occurs if an existing group No. is specified.
The tool life data for the group No. indicated by the cursor will be
displayed.
T-life
group
This changes to the mode enabling tool life management data to be
set and displayed with group unit Nos.
Operation method (Registering a group) (M system/L system)
(1)
Press the menu
(2) Designate the group No. to be registered.
25 INPUT
The group No., method, and life value is
set at the L system.
(Example) 25/1/3000
(Note 1) An error occurs if the group No. duplicates a pre-existing group No.
(Note 2) The group is not registered if the following operations are performed after newly registering a
group No..
• The application is exited without registering even 1 item of tool life data.
• The screen is changed to that of other than the group unit display.
• The part system is changed.
Operation method (Erasing a group)
(1) Press the menu Group delete .
(2) Designate the group to be erased.
72 INPUT
If nothing is input in the input area, the group at the cursor location is erased.
Details
.
Group regist
INPUT
(M system/L system)
3.5 Tool Life Management
INPUT key to change the
The life management data for the selected group No.
displays empty.
The selected group No. is erased.
106
Type Reference
A "Registering a group"
A "Erasing a group"
A "Erasing all groups"
A "Changes the group
No."
C "Changing to the group
unit display"