4. Edit Screens
4.3 Program Check (2D)
The program check function (2D) is used to graphically draw the machining program movement path without
performing auto operation.
The machining program can be checked with graphic data drawn at a high speed.
Using All display menu, normal display and full-screen display modes can be switched.
(Note1) The program check (2D) function is an additional specification. The graphic check option is required.
(Note2) When changing the screen to the edit screen, display depends on the previous checking type
(2D/3D). Note that when selecting this screen during graphic trace, 3D solid program check will apply.
If the 3D solid check option is not valid in this time, the area of "Check" tag will not be blank.
■ Normal display (full-screen display mode is OFF)
< Drawing area >
(1)
(2)
(3)
(4)
(5)
(6)
< Drawing area: 2-plane >
4.3 Program Check (2D)
< Input area displayed >
163
(8)
(9)
(7)