Mitsubishi Electric 700 Series Training Manual page 254

6. Maintenance Screens
Designating multiple files
(1) Designating multiple serial files
Multiple serial files can be transferred, compared and erased in the file setting column A. Set as follows in
this case.
File : First file name
- : Last file name
(2) Using a wild card
A wild card (*) can be used in the file name.
File : *
-
Selecting an NC memory file other than a program
(1) Press the menu Device select .
(2) Press the menu Memory .
(3) Select the menu Dir
(4) Press the menu Tool offset
(Note) The file name for each directory is fixed. Refer to "6.2.10 List of file names" for the file names.
.
.
246
6.2 Input/Output Screen
All files will be selected.