Enlarging And Reducing The Workpiece Shape; Moving The Workpiece Shape; Rotating The Workpiece Shape - Mitsubishi Electric 700 Series Training Manual

4. Edit Screens

4.4.4 Enlarging and Reducing the Workpiece Shape

Operation method
(1) Press the menu Zoom .
(2) Press the menu Zoom in .
To enlarge the drawing:
Press the menu Zoom in
To reduce the drawing size:
Press the menu Zoom out

4.4.5 Moving the Workpiece Shape

Operation method
(1) Press the menu Move .
(2) Use the Up , Down ,
keys to adjust the display position.
The cursor movement keys (
← , →
) can also be used for moving.

4.4.6 Rotating the Workpiece Shape

Operation method
(1) Press the menu Rotate .
(2) Use the Up , Down ,
keys to adjust the display angle.
The cursor movement keys (
← , →
) can also be used to rotate.
(Note 1) The set display angle is maintained even after rebooting the machine.
The mode changes to the enlargement/reduction mode, and
the following menu appears.
The drawing area center position is set in the center, and the
enlarged workpiece is redisplayed.
or - key.
or + key.
The mode changes to the movement mode and the
following menu appears.
The workpiece shape moved in the designated direction is
Left , Right
redisplayed.
↑ , ↓ ,
The mode changes to rotation mode and the following menu
appears.
The workpiece shape rotated in the designated direction is
Left , Right
redisplayed.
↑ , ↓ ,
180
4.4 Program Check (3D)
Zoom Zoom
in out
Up Down Left
Up Down Left
Right
Right