Registering A Tool In The Magazine Pot - Mitsubishi Electric 700 Series Training Manual

3. Setup Screen

3.4.1 Registering a Tool in the Magazine Pot

Operation method (Selecting a magazine No.)
(1) Press the menu
(Note) The No. of magazines differs according to the machine specification.
Operation method (Registering the tool in the magazine pot)
(1) Designate the pot No.
Pot No. 21
(2) Input the tool number.
50 INPUT
When the INPUT key is pressed
without setting a value, the tool number
does not change and the cursor moves to
the " tool number " for the next pot number.
(Note) To set "D", use the →│ key to move the cursor.
Refer to the manual issued by the machine tool builder for details on the "D" functions and
purposes.
Magazn 2 .
INPUT
The tool data of the set magazine No. appears.
The tool data appears with the designated pot No. at the
head.
The cursor moves to the tool No. setting column.
The input tool number displays and the cursor moves to the
next tool number.
100
3.4 Tool Registration