Mitsubishi Electric 700 Series Training Manual page 180

4. Edit Screens
Operation method (Centering)
(1) Press the menu Display range .
Zoom Zoom
in out
(2) Press the Centering .
(Note 1) In the 2-plane display mode such as "XY/XZ", centering is applied for the upper and lower areas.
The operation method is the same as the 1-plane display mode.
(Note 2) When the Centering menu key is pressed after the display scale has changed, only the
centering is applied without changing the scale value.
Up Down Left
172
4.3 Program Check (2D)
A white frame indicating the display range appears on
the screen.
The display range input mode is activated, and the
following menu appears.
Right Center-
ing
The display position is changed so that the current
machine position appears in the center of the drawing
area.