Screen Configuration - Mitsubishi Electric 700 Series Training Manual

1. Operating the Setting and Display Unit

1.2 Screen Configuration

(7)
Display items
Display item
(1) NC name
(2) Part system name
(3) Power ON request
(4) Operation status
(5) MDI status
(6) Screen name
(7) Operation status
(8) Alarm
(9) Operation message
(10) Time
(1) (2) (3) (4) (5)
The currently displayed NC name (name set in parameter "#1135 unt_nm") is
displayed.
When using the multi-part system, the currently displayed part system name (name
set in parameter "#1169 system name") is displayed.
The part system name is not displayed for the 1-part system.
This appears if a parameter requiring the power to be turned ON again has been
changed.
This flickers at an approx. one-second interval.
The displayed part system's operation mode is displayed.
The MDI status is displayed when the MDI operation mode is selected.
This does not appear when other operation modes are selected.
The tab for the currently selected screen is selected and displayed.
The NC operation status is displayed.
The currently occurring alarm or warning with the highest priority is displayed.
The operation message is displayed.
The current time is displayed. (Hour: minute)
1.2 Screen Configuration
(6)
Details
6
(8)
(9)
(10)