Mitsubishi Electric 700 Series Training Manual page 203

4. Edit Screens
Designating multiple files
A wildcard (*) can be used for the file name.
By using a wildcard, multiple files can be transferred, compared, and erased at one time.
[Ex. 1] When programs 1 to 1000 exist in the NC memory.
Designate "*" in the file name
Designate "*.*" in the file name : There is no target program.
Designate "1*" in the file name : The target program is "1, 10 to 19, 100 to 199, 1000".
Designate "1*.*" in the file name : There is no target program.
Designate "*1" in the file name : The target program is that where the position of the 1 is "1".
Designate "*1*" in the file name : The target program is all of the programs containing "1".
Designate "1*1" in the file name : The target program is "11, 111, 121, 131, 141, 151, 161, 171, 181, 191".
[Ex. 2] When programs 1.PRG to 1000.PRG, and 1 to 1000 exist in the HD.
Designate "*" in the file name
Designate "*.*" in the file name : The target program is "1.PRG to 1000.PRG".
Designate "1*" in the file name : The target program is "1, 10 to 19, 100 to 199, 1000".
Designate "1*.*" in the file name : The target program is "1.PRG, 10.PRG to 19.PRG, 100.PRG to
Operation method (Selecting a file from a device other than the NC memory)
(1) Press a device selection shortcut key.
(Example)
(2) Press the menu File set .
Memory HD
By pressing the operation menu at this time, the device can be changed.
When selecting a directory from the list.
(3) Move the cursor to the directory to be
selected and fix.
↑ , ↓ ,
INPUT
Repeat this operation until the cursor
arrives at the target directory.
Next, refer to operation (4).
: The target program is "1 to 1000".
(1, 11, 21, 31, ......101, 111, .......981, 991)
(1, 10 to 19, 21, 31, ......100 to 199, 201, 210, .......981, 991,1000)
: The target program is "1 to 1000".
199.PRG, 1000.PRG".
G
Serial Memory
card
The device name changes to "HD".
The root directory (/) appears in the directory.
The HD program list and input area appear.
A menu similar to the following appears.
DS Ethernet FLD
The directory selected in the directory column appears.
The contents of the selected directory appear in the list.
Select ".." to move to one directory above.
There is no change when "." is selected.
195
4.5 Program Input/Output
List Sort Retn
update change