1. Cutting unit power connectors (48 V)
2.
Separate the two connectors and inspect them for the following:
•
damage
•
corrosion
•
debris
•
proper alignment and seating of the pins inside the connectors
Pass
The connector inspection passed.
1.
Reconnect the 48V power connector.
2.
Go to Step 3.
Fail
One or more of the inspection checks failed. Repair or replace the worn or damaged parts. Go to
Returning the Machine to Service (page 21)
Figure 27
2. Operator's seat
and follow the steps listed.
56
g222909