Toro Greensmaster TriFlex 3300 Manual page 197

Step 3: Test the wiring for solenoid SRV.
1. Remove the right side cover.
2. Slide the operator seat assembly all the way toward the rear of the machine. Then tilt the seat itself forward.
3. Locate the primary TEC-5001 controller
1. Right front tire
2. Operator seat
4. Remove the four mounting bolts that secure the primary TEC-5001 controller
5. Lift the primary TEC up and out of its mounted location
6. Fully loosen the socket-head screw that secures main harness connector P01 to the primary TEC
120) and then unplug the connector.
(Figure 119).
Figure 119
3. Primary TEC-5001 controller
4. Mounting bolts (2 of 4 are shown)
(Figure
197
(Figure 119).
120).
g237658
(Figure