Mitsubishi Electric FR-A800 Series Instruction Manual page 901

Revision date
Apr. 2020
Mar. 2021
900
IB-0600503ENG-M
Downloaded from ManualsNet.com
*
Manual number
IB(NA)-0600503ENG-L Added
• Operation command source selection for the CS signal (Pr.162 = "1000 to 1003, 1010 to 1013")
• Main circuit capacitor life measurement at power OFF (every time) (Pr.259 = "11")
• Selecting clearing of the current position 2 monitor value (Pr.419 = "200, 210, 300, 310, 1310")
• Pr.506 Display estimated main circuit capacitor residual life
• Current input check terminal selection (Pr.573 = "11 to 14, 21 to 24")
• Ready bit status selection (for FR-A8ND and FR-A8NF)
• Forward stroke end (LSP) signal, Reverse stroke end (LSN) signal
• Low-speed forward rotation command (RLF) signal, Low-speed reverse rotation command (RLR)
signal
• Vector control for PM motor with encoder supported (for FR-A8AL and FR-A8TP)
• Input terminal monitor (for terminals S1 and S2)
• Reset selection after inverter faults are cleared (with the HMS network option installed)
IB(NA)-0600503ENG-M Added
• Cooling fan operation selection during the test operation (Pr.244 = "1000, 1001, 1101 to 1105")
• Display/reset ABC relay contact life (Pr.507, Pr.508)
• DriveControl writing restriction selection (Pr.349 = "10000, 10001, 10100, 10101, 11000, 11001,
11100, 11101")
search engine
Revision