Mitsubishi Electric FR-A800 Series Instruction Manual page 607

• Switch the power voltage/current specifications of terminals 2 and 4 by Pr.73 Analog input selection or Pr.267 Terminal
4 input selection to match the specification of the input device. After changing the Pr.73 or Pr.267 settings, check the
voltage/current input selection switch. Incorrect setting may cause a fault, failure, or malfunction. (Refer to
the setting.)
Pr.128 Pr.609
setting Pr.610
0
10
11 Invalid
20
21
40 to 43 Enabled
50
51
60
61
70
71
80
Invalid
81
90
91
100
101
1000
1001
1010
1011
2000
Enabled
2001
2010
2011
*1 When Pr.133 ≠ "9999", the Pr.133 setting is valid.
*2 CC-Link, CC-Link IE Field Network, or LONWORKS communication is available. For details on communication, refer to the Instruction Manual of
each option.
*3 For details on the PLC function, refer to the PLC Function Programming Manual.
• The set point/deviation input method can also be flexibly selected by Pr.609 PID set point/deviation input selection and
the measured value input method can be selected by Pr.610 PID measured value input selection. Selection by Pr.609
and Pr.610 is valid when Pr.128 = "1000 to 2011".
Pr.609 to Pr.610 settings
1
2
3
4
5
*4 When the same input method has been selected for the set point and measured value at Pr.609 and Pr.610, set point input is invalid. (Inverter
runs at set point 0%)
*5 CC-Link, CC-Link IE Field Network, or LONWORKS communication is available. For details on communication, refer to the Instruction Manual of
each option.
606
5. PARAMETERS
5.14 (A) Application parameters
Downloaded from ManualsNet.com
PID action
PID invalid
Reverse action
Forward action
Reverse action
Forward action
Dancer control
Reverse action
Forward action
Reverse action
Forward action
Reverse action
Forward action
Reverse action
Forward action
Reverse action
Forward action
Reverse action
Forward action
Reverse action
Forward action
Reverse action
Forward action
Reverse action (without
frequency reflected)
Forward action (without
frequency reflected)
Reverse action (without
frequency reflected)
Forward action (without
frequency reflected)
Input method
*4
Terminal 1
*4
Terminal 2
*4
Terminal 4
*5
Communication
PLC function
search engine
Set point input Measured value input
— —
— —
*1
Terminal 4
Terminal 2 or Pr.133
For details on dancer control, refer to
— —
*2
Communication Communication
— —
PLC function (applied to the PLC function (applied to
*3
frequency) the frequency)
— —
PLC function (not
PLC function (not applied to
applied to the
*3
the frequency)
frequency)
*1
According to Pr.610
According to Pr.609
— —
*1
According to Pr.610
According to Pr.609
— —
page 496
Deviation input
—
Terminal 1
—
page 622.
Communication
*2
—
PLC function (applied
to the frequency)
—
*3
PLC function (not
applied to the
*3
frequency)
—
*3
—
According to Pr.609
—
According to Pr.609
for
*2
*3