Mitsubishi Electric FR-A800 Series Instruction Manual page 515

4.
Calibration parameter selection
Turn
5.
Selecting a parameter
Turn
"
6.
Analog voltage (current) display
Press
Do not touch
7.
Voltage (current) application
Apply a 5 V (20 mA). (Turn the external potentiometer connected between terminals 1 and 5 (terminals 4 and 5) to
a desired position.)
8.
Setting completed
Press
alternately.
• Turn to read another parameter.
• Press to return to the "
• Press twice to show the next parameter.
514
5. PARAMETERS
5.12 (T) Multi-function input terminal parameters
Downloaded from ManualsNet.com
until " " appears. Press
until " " (C19 (Pr.920) Terminal 1 gain (torque/magnetic flux)) appears for terminal 1, or
" (C41 (Pr.933) Terminal 4 gain (torque/magnetic flux)) for terminal 4.
to display the analog voltage (current) % currently applied to the terminal 1 (4).
until calibration is completed.
to confirm the selection. The analog voltage (current) % and "
" display.
search engine
to display " ".
" (" ") are displayed