Mitsubishi Electric FR-A800 Series Instruction Manual page 203

 Selecting a parameter by function group number to change its setting
The following shows the procedure to change the setting of P.H400 (Pr.1) Maximum frequency.
Operating procedure
1.
Turning ON the power of the inverter
The operation panel is in the monitor mode.
2.
Changing the operation mode
Press
3.
Selecting the parameter setting mode
Press
segment LCD display.)
4.
Enabling the function group selection
Press
5.
Enabling the function group selection
Turn
"
of Protective function parameter 4.
6.
Selecting a parameter
Turn
value. "
7.
Changing the setting value
Turn
"
202
5. PARAMETERS
5.1 Parameter list
Downloaded from ManualsNet.com
to choose the PU operation mode. [PU] indicator turns ON.
to choose the parameter setting mode. (The parameter number read previously appears on the 12-
several times until "
until " " (Protective function parameter 4) appears. Press
" will appear, which shows that the operation panel is ready for selection of a number in the group
until " " (P.H400 Maximum frequency) appears. Press
(initial value)" appears.
to change the set value to "
" are displayed alternately after the setting is completed.
search engine
" appears. Parameter groups can now be selected.
". Press to confirm the selection. "
to confirm the selection.
to display the present set
" and