Terms - Mitsubishi Electric MELSEC iQ-R Series User Manual

TERMS

Unless otherwise specified, this manual uses the following terms.
Term
16-axis module
4-axis module
8-axis module
Axis
Buffer memory
CC-Link IE TSN
Command generation axis
Cyclic transmission
Dedicated instruction
Device
Disconnection
Global label
GX Works3
Intelligent function module
Label
Link device
Master station
Module label
Motion control station
Motion module
MR Configurator2
MR-J5-G
MR-J5D-G
MR-J5W-G
MR-JET-G
RD78G
Remote input (RX)
Remote output (RY)
Remote register (RWr)
Remote register (RWw)
Return
Safety communication
Servo amplifier axis
Servo network
Transient transmission
18
Downloaded from ManualsNet.com
Description
Another term for RD78G16
Another term for RD78G4
Another term for RD78G8
A target for motion control
A memory in an intelligent function module, where data (such as setting values and monitoring values) is stored. When
using the CPU module, the memory is indicated for storing data (such as setting values and monitored values) of the
Ethernet function and data used for data communication of the multiple CPU function.
A high-speed and large-capacity open field network that is based on Ethernet (1000BASE-T)
An axis that performs only command generation. "Command generation axis" is not included in the number of controlled
axes of the controller.
A function that exchanges data periodically among stations on the network
An instruction for using functions of the module
Various types of memories (X, Y, M, D, or others) in a CPU module
A process of stopping data link if a data link error occurs
A label that becomes enabled for all program data when creating multiple program data in a project. There are two types
of global labels: a module label that is automatically generated by GX Works3 and a label that can be created for any of
the specified devices.
The product name of the software package for the MELSEC programmable controllers
A module that has functions other than input and output, such as an A/D converter module and D/A converter module
A variable used in a program
A device (RX, RY, RWr, or RWw) in a module on CC-Link IE Field Network
A station that controls the entire network. This station can perform cyclic transmission and transient transmission with all
stations. Only one master station can be used in a network.
A label that represents one of memory areas (I/O signals and buffer memory areas) specific to each module in a given
character string. GX Works3 automatically generates this label, which can be used as a global label.
A slave station that exchanges cyclic data by using slave labels and the motion control
Another term for RD78G
The product name of the setup software for the servo amplifier
MR-J5-_G_(-RJ) servo amplifier
MR-J5D_-_G_ servo amplifier
MR-J5W_-_G servo amplifier
MR-JET-_G servo amplifier
Another term for the MELSEC iQ-R series Motion module (compatible with CC-Link IE TSN)
Bit data input from a slave station to the master station (For some areas in a local station, data is input in the opposite
direction.)
Bit data output from the master station to a slave station (For some areas in a local station, data is output in the opposite
direction.)
Word data input from a slave station to the master station (For some areas in a local station, data is input in the opposite
direction.)
Word data output from the master station to a slave station (For some areas in a local station, data is output in the
opposite direction.)
A process of restarting data link when a station recovers from an error
A function to exchange safety data between safety stations on the same network
A servo amplifier or virtual servo amplifier controlled by a controller. "Servo amplifier axis" is included in the number of
controlled axes of the controller.
A network between the Motion module and drive unit
• CC-Link IE TSN
A function of communication with another station, which is used when requested by a dedicated instruction or the
engineering tool
search engine