Table of Contents
Advertisement
Generic Terms and Abbreviations
Generic term/abbreviation
PLC CPU
QD75MH
MR-J3-B
Peripheral device
GX Developer
GX Configurator-QP
Servo amplifier (drive unit) Abbreviation for SSCNET
Manual pulse generator
DOS/V personal computer IBM PC/AT
Personal computer
Workpiece
Axis 1, axis 2, axis 3,
axis 4
1-axis, 2-axis, 3-axis,
4-axis
OPR
OP
(Note)
SSCNET
Component List
QD75MH1 positioning module
QD75MH2 positioning module
QD75MH4 positioning module
Before Using the Product
Unless specially noted, the following generic terms and abbreviations are used in this
manual.
Generic term for PLC CPU on which QD75MH can be mounted.
Generic term for positioning module QD75MH1, QD75MH2 and QD75MH4.
The module type is described to indicate a specific module.
Servo amplifier: Abbreviation for MR-J3- B. (
Generic term for DOS/V personal computer that can run the following "GX Developer" and
"GX Configurator-QP".
Abbreviation for GX Developer (SW4D5C-GPPW-E or later).
Abbreviation for GX Configurator-QP (SW2D5C-QD75P-E (Version 2.21X) or later).
Abbreviation for manual pulse generator (MR-HDP01) (prepared by user).
®
and compatible DOS/V compliant personal computer.
Generic term for DOS/V personal computer.
Generic term for moving body such as workpiece and tool, and for various control targets.
Indicates each axis connected to QD75MH.
Indicates the number of axes. (Example: 2-axis = Indicates two axes such as axis 1 and axis 2,
axis 2 and axis 3, and axis 3 and axis 1.)
Generic term for "Home position return".
Generic term for "Home position".
High speed synchronous communication network between QD75MH and servo amplifier.
The table below shows the component included in respective positioning modules:
Module name
Details of generic term/abbreviation
= capacity)
compatible servo amplifier (drive unit).
(Note): SSCNET: Servo System Controller NETwork
QD75MH1
1
A - 20
Quantity
QD75MH2
QD75MH4
1
1
1
Advertisement
Table of Contents
