Table of Contents
Advertisement
N-1
Interactions (cont'd)
5.
When the NIGHT CONNECTION - FLEXIBLE [N-2] feature is provided, assignments can be made by
the ATTENDANT CONSOLE [A-3] or NIGHT CONNECTION - FIXED station by use of the CALL
FORWARDING - ALL CALLS [C-5] feature.
6.
CALL FORWARDING - BUSY LINE/DON'T ANSWER [C-2, 3]: A Night user can activate the CALL
FORWARDING - BUSY LINE/DON'T ANSWER [C-2, 3] feature if available to the user. A call ringing
at an idle NIGHT CONNECTION - FIXED station rings for 30 seconds before forwarding. A call
forwarded from a busy NIGHT CONNECTION - FIXED station rings normally at the designated station.
A station-to-Attendant call cannot be forwarded to a NIGHT CONNECTION - FIXED station. An
incoming trunk call forwarded from an idle unanswered NIGHT CONNECTION - FIXED station alerts
the designated station with distinctive ringing.
7.
CALL WAITING [C-12, 13]: Call Waiting tones are not directed to a busy NIGHT CONNECTION -
FIXED. When the Night user goes on-hook, ringing is returned if a call is waiting.
8.
CALL TRANSFER - ALL CALLS [C-11]: When the NIGHT CONNECTION feature is active, the CALL
TRANSFER - ALL CALLS [C-11] feature is always enabled, regardless of the Class of Service of the
station assigned to NIGHT CONNECTION - FIXED.
9.
STATION MESSAGE DETAIL RECORDING (SMDR) [S-10]: The SMDR records contain Night
service calls. The SMDR call record includes the station number answering the call.
10.
Incoming Restricted Line: When NIGHT CONNECTION - FIXED or FLEXIBLE [N-2] is active, the line
Class of Service restrictions can be automatically changed when the system is in the Night mode, to allow
a station normally restricted during the day to receive incoming calls.
11.
NIGHT CONNECTION - FIXED: Arrangements are provided to route calls normally directed to the
Attendant, to a preselected station line within the system when Night service is activated. In addition,
incoming calls from specific non-Direct Inward Dialing (DID) exchange network trunks can be arranged
to route to specific station lines. The routings are provided on a fixed basis via the MAT [M-18]. TRUNK
ANSWER FROM ANY STATION (TAS) [T-8], when available, may also be provided for Night calls not
assigned to Night stations. Assignments can be made per incoming trunk.
12.
When CALL FORWARDING - ALL CALLS [C-5] or CALL FORWARDING - BUSY LINE/DON'T
ANSWER [C-2, 3] is provided, and the station is busy, Call Forwarding is implemented on the station line.
If the station is in a HUNT GROUP [S-7, 8, 9], call forwarding will take place prior to the station hunting
feature or UCD [U-1].
13.
CALL QUEUING [C-9]: Incoming trunk calls to the Night Connection station will queue on a First In/
First Out basis.
14.
CLASS OF SERVICE - INDIVIDUAL [C-15]: Night Connection station's class of service should be
constructed to allow access to the routes and service features required to complete the tasks of the Night
Connection station.
15.
DIRECT INWARD DIALING [D-8]: Only Listed Directory Number DID calls (as assigned in the ALDN
command) will be directed to the Night Connection station. All DID trunks must be programmed to the
Night Connection station via the ACSI command.
16.
When system is in the Night mode of operation, incoming calls are directed in the following order:
NIGHT CONNECTION - FLEXIBLE
NIGHT CONNECTION - FIXED
TAS
Page 540
Night Connection - Fixed
[N-2]
[N-1]
[T-8]
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
