NEC NEAX2400 IPX Programming Manual page 616

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Service Conditions
1.
This service is provided when off-hook. In the preselect status, this is not provided.
2.
This service is not provided when a call is originated by using HOT LINE [H-1] service.
3.
In case a call is originated by using TRUNK LINE APPEARANCE service, the connected trunk number
is displayed.
4.
If the trunk number is not assigned, the LCD doesn't display.
5.
The maximum digits of the displayed trunk number is 4.
6.
The display position of the selected line/trunk number may be changed by system data as below:
a.)
b.)
c.)
Programming
ASYD - System Data 1, Index 389, Bits 5 and 6. Location of Off-Hook Line Number Display on the
term
D
.
00:
Right side (Standard Setting)
01:
Center
10:
Left side
11:
-
System Data 1, Index 389, Bit 7. Off-Hook Line Number Display - D
data "1".
FCCS Programming
No unique programming is required for the FCCS network.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Off-Hook Line Number Display - D
(Time Display)
(Time Display)
25640
(Time Display)
term
25640
term
. 0/1= Out/In Service. Assign
O-37D
Page 573

Advertisement

Table of Contents
loading

Table of Contents