Table of Contents
Advertisement
Service Conditions (cont'd)
6.
If a user attempts to set MESSAGE WAITING to a station where MESSAGE WAITING has already been
set, busy tone will be sent to the station, and the D
7.
When a station is restricted from MESSAGE WAITING LAMP SETTING-STATION - CCIS or is an
unused telephone number, and another user attempts to set/cancel MESSAGE WAITING LAMP
SETTING-STATION - CCIS, the calling station will hear reorder tone. A D
term
8.
When a D
indicate:
term
9.
When a D
display will indicate:
Interactions
An external power source is required to light a lamp for a single line telephone.
Programming
STEP 1:
ANPD - Reserve a number level for feature access and cancel. Assign for Normal (N), Hooking (H),
and Busy (B). Assign NND in accordance with a predetermined numbering plan.
STEP 2:
ASPA - Assign an access code to MESSAGE WAITING LAMP SETTING activate SRV = SSCA
(Service Code Appendix), SIDA = 54 and to MESSAGE WAITING LAMP SETTING extinguish
SRV = SSCA (Service Code Appendix), SIDA = 55. Assign Connection Status Index (CI) for Normal
(N) service.
STEP 3:
ASFC - Assign a Service Feature Class that allows SFI = 74 to the stations that will receive the feature
MESSAGE WAITING LAMP SETTING. Assign a Service Feature Class that allows SFI = 82 to
stations that set the feature MESSAGE WAITING - CCIS.
STEP 4:
AKYD - FKY 9: to set MW. FKY 11: to cancel MW.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Message Waiting Lamp Setting - Station - CCIS
(Time Display)
(Time Display)
user presses the MESSAGE WAITING LAMP SETTING line/feature key, the display will
(Time Display)
user presses the MESSAGE WAITING LAMP SETTING cancel line/feature key, the
(Time Display)
term
phones will display:
MW BUSY
MW REST
MW SET
MW CANCEL
M-36
term
phone will display:
Page 943
Advertisement
Table of Contents
