Table of Contents
Advertisement
Interactions
1.
DO NOT DISTURB may be listed in some literature as available by a programmable Line/Feature key. A
term
D
ACD station is not equipped with a DND key. If DO NOT DISTURB is to be made available to this
station, it must be programmed to a Line/Feature key.
2.
DATA INTERFACE-AUTOMATIC ANSWER may be activated if the D
DISTURB mode.
Programming
STEP 1:
AKYD - Assign the following key data for the D
TN:
1
STN:
Station Number
TP:
Type of D
RING:
KYN: Key Number (1-40)
KYI:
Service Index
KD:
Not assigned for Feature Key
FKY: Feature key Number
FKY: = 50, DO NOT DISTURB
STEP 2:
ADSL - Assign SN=0 (Idle) and FKY=50 (Do Not Disturb; DND).
This command is used for assigning the function to each soft key.
STEP 3:
ASFC - Select an indication type (REST/DND) on the display of a D
station that has been set DO NOT DISTURB.
SFI:
= 114, Calling Party DND Indication (D
0/1:
REST/DND.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Do Not Disturb - D
term
0/1:
0:
No Ringing
1:
Ringing All Lines
2:
Ringing on Prime Line Only
3:
Flexible Ring Assignment, enables RG parameter
0:
Key Not Used
1:
Feature Key
2:
Multi-Line Key
term
term
:
term
)
D-11D
term
station is in the DO NOT
term
when it terminates to a
Page 287
Advertisement
Table of Contents
