Table of Contents
Advertisement
D-153
Service Conditions (cont'd)
13.
Ringer patterns 2, 3 or 4 cannot be assigned for this feature. When one of those ringer patterns is assigned
from the MAT, default value "Ringer pattern 6" is automatically set.
14.
When System Data 3 is changed, circuit card (LC,ELC) initialization is required.
15.
The following circuit card is required for Analog Caller ID:
16.
When the multiple incoming calls are simultaneously terminated to the multi-line on the D
of ringing pattern is as follows:
PRIORITY
Ringing pattern
Programming
STEP 1:
ASYD - System Data 1, Index 417, Bit 0. Recall Ringer Pattern for CALL BACK [C-1], CALL
WAITING - ORIGINATING [C-31], and OUTGOING TRUNK QUEUING [O-2].
0/1 = Ringer pattern 5/Ringer pattern 1.
System Data 3, Index 0. Assign Timer Value for Ringer Pattern 0.
System Data 3, Index 1: Assign Timer Value for Ringer Pattern 1.
System Data 3, Index 3, Bit 0. 2 Burst on the ON Time for Ringer Pattern 0. 0/1 = Not required/
Required.
System Data 3, Index 3, Bit 1. 2 Burst on the ON Time for Ringer Pattern 1. 0/1 = Not required/
Required.
System Data 3, Index 3, Bit 5. 3 Burst on the ON Time for Ringer Pattern 5. 0/1 = Not required/
Required.
System Data 3, Index 7: Assign Timer Value for Ringer Pattern 5.
System Data 3, Index 8: Assign Timer Value for Ringer Pattern 6.
System Data 3, Index 9: Assign Timer Value for Ringer Pattern 7.
STEP 2:
ACID - Assign the calling number for this service.
TYPE: 1
TN:
Tenant number
STN:
Station number
CID:
Calling number (Maximum 28 digits)
SRV:
6 (Distinctive Ringing - Caller ID)
RGP:
Ringer pattern (0, 1, 5 - 7)
FCCS Programming
No unique programming is required for the FCCS network.
Page 328
Distinctive Ringing - Caller ID
CIRCUIT CARD NAME
PA-8COTBJ
1ST
RG7
2ND
3RD
RG6
RG5
REMARKS
term
4TH
RG0
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
, the priority
5TH
RG1
Advertisement
Table of Contents
