Table of Contents
Advertisement
FCCS Programming (cont'd)
STEP 2:
ARRCN - Routes that will be allowed TRUNK-TO-TRUNK CONNECTION must be allowed here
for ARI-A-RES.
ICRT:
OGRT:
ARI-A-RES:
ARI-D-RES:
When ARI-D-RES is needed for a direct dial TRUNK-TO-TRUNK CONNECTION, refer to the
application within this document for the programming steps. Such applications include REMOTE
ACCESS TO SYSTEM [R-2], TANDEM SWITCHING OF TIE TRUNKS-2/4-WIRE [T-1],
INCOMING CENTRAL OFFICE TO TIE LINE CONNECTION [I-3], and TOLL RESTRICTION-
3/6-DIGIT [T-7].
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
Note:
in addition to ASYDL or ASYDN.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Trunk-to-Trunk Connection
Incoming Route Number
Outgoing Route Number
This allows/restricts trunk-to-trunk (tandem) connection via the Attendant Console
and stations.
This allows/restricts trunk-to-trunk (tandem) connections via Direct Dial access from
a station and trunks.
0: Alternate routing is restricted
1: Alternate routing is allowed
0: Alternate routing is restricted
1: Alternate routing is allowed
2: Toll Restricted
T-10
Page 763
Advertisement
Table of Contents
