Table of Contents
Advertisement
Interactions (cont'd)
7.
A CALL TRANSFER to a station with CALL FORWARDING [C-2, 3, 5] set will forward according to
the conditions of the feature set, unless the station is set to CALL FORWARD - ALL CALLS [C-5] to the
Attendant Console. CALL FORWARDING-OVERRIDE [C-26] supersedes CALL FORWARDING-
ALL CALLS [C-5].
8.
A CALL TRANSFER to a station in a STATION HUNTING [S-7, 8, 9] group will hunt according to the
conditions of the STATION HUNTING [S-7, 8, 9] group.
9.
A CALL TRANSFER to a D
Programming
STEP 1:
ASYD - System Data 2, Index 1, Bits 0 and 1. Assign data "11" to allow CONSULTATION HOLD -
ALL CALLS - D
STEP 2:
ATNR - Allow tenant-to-tenant connection for Inter and Intra-tenant connections. Assign Tenant
Restriction Index (TRI) 0 and 4 on an Inter and Intra-tenant basis.
FCCS Programming
No unique programming is required for the FCCS network.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Transfer - Attendant
term
that has DO NOT DISTURB [D-21D] set will receive reorder tone.
term
[C-17D] for all types of connections.
C-10
Page 159
Advertisement
Table of Contents
