NEC NEAX2400 IPX Programming Manual page 735

Feature programming manual

Hide thumbs Also See for NEAX2400 IPX:

Table of Contents

ASYD - System Data 1, Index 186, Bit 4. Serial Call Loop Release 0/1: OUT/In Service When data

"1" is assigned, CCSA calls will not ring the ATT. In this case, change ARTD CDN 6:TCL from

CCSA to DDD Line, TIE Line, etc.

System Data 2, Index 7, Bit 2. Is SERIAL CALL to be enabled on a per-tenant basis? 0/1: No/Yes.

System Data 1, Index 43, Bit 4. Is Attendant able to reenter loop of serial call? 0/1: No/Yes.

FCCS Programming

No unique programming is required for the FCCS network.

NEAX2400 IPX Feature Programming Manual

NDA-24297, Issue 1