NEC NEAX2400 IPX Programming Manual page 720

Feature programming manual

Hide thumbs Also See for NEAX2400 IPX:

Table of Contents

Service Conditions (cont'd)

Node A collects the billing information of Node B, Node C and Node D, which are stored in Node B by

polling method.

Node D sends the billing information to Node B.

FCCS - Center Node

SOCKET Interface (LAN Interface) Conditions

SMDR data can be output via LAN cable.

A maximum of four SMDR apparatuses per node are available.

When providing this feature with LAN interface, IMX text format must be designated by the ASYDL

command (SYS 1, Index 578-581, b0).

SMDR apparatus with LAN interface and SMDR apparatus with RS232C interface cannot be connected

to the same node.

NEAX2400 IPX-UMG Conditions

When the system is IPX-UMG, SMDR equipment (PC) is connected via RS232C/LAN to SP.

The maximum of calls available for concurrent storage in the system memory is:

Relocation condition for SMDR

When relocating a SMDR equipment to other node, reassign the billing information-related data. The relocation

conditions are shown below.

Make sure there is no billing information in the each node from Center Node before changing the SMDR

location. (Ex. Make sure billing information is output to the SMDR by sending test signal.)

An exact billing information may not be output to SMDR while changing SMDR location.

When removing the SMDR equipment from the Center Node, first of all, delete the billing information-

related data, and also when connecting the SMDR to new-Center Node, the user must, first of all, assign

appropriate billing information-related data.

NEAX2400 IPX Feature Programming Manual

NDA-24297, Issue 1

Station Message Detail Recording (SMDR)

FCCS Network

Billing information of

47,000 times the number of LMGs

CCIS - Center Node

Billing information of

: Fusion Call Control Signal (FCCS)

: Common Channel Inter-Office Signaling (CCIS)

Destination Point Code