NEC NEAX2400 IPX Programming Manual page 556

Service Conditions (cont'd)
7. The LCD on the D
SETTING
MESSAGE
WAITING
already set
CANCELLING
MESSAGE
WAITING SETTING
not set
Restricted
SETTING
station,
unused
telephone
number, dead
level,
CANCELLING
restriction
Interactions
1. For MESSAGE WAITING LAMP SETTING-STATION, the 8DLC/16ELC card is required.
2. An external power source is required to light a single line telephone lamp. The non-display D
80 VDC power source. NEC stocks Lorain Model HSA3H.
3. The use of the following features has no effect on this feature. MESSAGE WAITING LAMP SETTING-
STATION can still be set to a station that has previously activated any of the following features:
• DO NOT DISTURB-D
• CALL BACK-D
• CALL BACK-D
• CALL FORWARDING-ALL CALLS-D
• CALL FORWARDING-DON'T ANSWER-D
• CALL FORWARDING-BUSY LINE-D
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Message Waiting Lamp Setting - Station
term
Series E station displays the following messages:
MW BUSY
MW CANCEL
MW SET
MW REST
MW REST
term
[D-21D].
term
[C-1D] set to called station.
term
[C-1D] set from called station.
LCD
(Time Display)
(Time Display)
(Time Display)
(Time Display)
(Time Display)
term
[C-5D] will not follow forwarding data.
term
[C-3D] will not follow forwarding data.
term
[C-2D] will not follow forwarding data.
M-30
Busy Tone
Service Set
Tone
Service Set
Tone
Reorder Tone
Reorder Tone
term
s use an
Page 513