NEC NEAX2400 IPX Programming Manual page 412

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

Interactions (cont'd)
Note 3:
The display is changed depending on the specification of ACIS.
Note 4:
Has priority over the FLEXIBLE ROUTING - FCCS service. FLEXIBLE ROUTING - FCCS is activated
only when the FCCS trunk for the destination station is busy.
A trunk is used after the call encounters station busy between the stations in the FCCS network.
Note 5:
Available only at the time of the data assignment for alternative route.
Note 6:
2.
The following services are available when the alternative route is CCIS and the service is provided in the
CCIS network:
CALL FORWARDING - ALL CALLS - CCIS
CALL FORWARDING - BUSY LINE - CCIS
CALL FORWARDING - DON'T ANSWER - CCIS
CALLING NUMBER DISPLAY - CCIS
DATA PRIVACY ON DEMAND - CCIS
DIGITAL DISPLAY - CCIS
DISTINCTIVE RINGING - CCIS
MESSAGE REMINDER - CCIS
NAME DISPLAY - SYSTEM - CCIS
STEP CALL - CCIS
VOICE CALL - CCIS
Programming / FCCS Programming
Before this procedure, data setting for station-to-station connection within the FCCS network and the
Flexible Route Numbering Plan (LCR/LCRS data) should be programmed.
STEP 1:
ANPD - Reserve the number level for the trunk access.
STEP 2:
ASPA - Assign SRV=LCR, LCRS and the access code to seize the flexible trunk.
STEP 3:
AMND - Assign the maximum necessary digits data.
STEP 4:
ARNP - Assign the access code for each route.
STEP 5:
AOPR - Assign the outgoing Route selection pattern.
STEP 6:
AFRS - Assign the flexible route selection data.
STEP 7:
ARTD - Assign the route data. For CCIS data, assign line signals for each Bch and Dch route.
STEP 8:
ATRK - Assign the trunk data.
STEP 9:
When the CCIS line is used for flexible routing, CCIS data is programmed via ADPC, ACIC and
ACSC.
STEP 10: AFRFL - Assign the Flexible Route data.
TN:
Tenant Number of the calling party
FPC:
Fusion Point Code of the destination node
ACC: Access code for the Flexible Routing (to C.O. or Tie Line), the same number assigned via
ASPA for LCR/LCRS/
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Flexible Routing - FCCS
[C-45]
[C-46]
[C-47]
[C-52]
[D-68]
[D-72]
[D-75]
[M-34]
[N-37]
[S-59]
[V-7]
F-35
Page 369

Advertisement

Table of Contents
loading

Table of Contents