NEC NEAX2400 IPX Programming Manual page 973

Feature programming manual

Hide thumbs Also See for NEAX2400 IPX:

Table of Contents

Operating Procedure (cont'd)

Station (B) answers; Stations (B) and (C) are connected with each other. If necessary, the call can be

transferred to another station by means of Call Transfer-All Calls service.

Service Conditions

The ranking of this service feature within the Night Connection service is as follows:

Night Connection Flexible.

Night Connection Fixed.

LDN Night Connection (This service).

Night Connection Outside.

Trunk Answer from Any Station (TAS) Connection.

Busy Tone Connection.

It is possible to register individual transfer destinations for up to 16 LDNs per Tenant. (Total of 16 LDNs

for LDN Night Connection and LDN Night Connection Outside.)

Valid connections with this service feature are shown below:

If the transfer destination is busy, restricted, etc., the call is routed to busy tone or reorder tone even when

the transfer destination is a CCIS line.

In the cases listed below, the next-ranked Night Connection service becomes effective.

a.) Data assignment for this service feature has not been made for the LDN.

b.) Toll restriction or connection control is in effect between the incoming route and the transfer

destination route.

c.) All trunks/routes are busy.

d.) There is a link block condition.

When there is no Night Connection service, the call is routed to busy tone.

LDN Night Connection - CCIS

Not Available

NEAX2400 IPX Feature Programming Manual

NDA-24297, Issue 1