Table of Contents
Advertisement
D-2
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ASPAL - This data must be assigned to the node calling the attendant.
SRV:
SSC
SID:
2=Operator Call
FPC:
FPC of the node that accommodates the called attendant console
Page 270
Dial Access To Attendant
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
