Table of Contents
Advertisement
Programming
STEP 1:
ASDT - Assign the station as a TEC = 18 for a Virtual Circuit. The Line Equipment Number (LEN) of
a SOFTWARE LINE APPEARANCE will exist in Groups 24-31.
STEP 2:
AKYD - This command assigns for D
Line/Feature key.
TN:
STN:
TP:
RING:
PL TN STN: Prime Line Tenant and Station Number
KYN:
KYI:
KD:
TN STN:
RG:
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Software Line Appearance
term
1
Station Number
term
Type of D
0/1:
Assign ringing to the entire phone.
0: No Ringing
1: Ringing All Lines
2: Ringing on Prime Line Only
3: Flexible Ring Assignment, enables RG parameter.
Key Number (1-40)
Service Index
0: Key Not Used
1: Feature Key
2: Multi-line Key
Not assigned for Feature Key
Tenant Number and Station Number of SOFTWARE LINE APPEARANCE.
Ringing Assignment per multi-line appearance
0: No Ringing.
1: Ringing in Day Mode Only.
2: Ringing in Night Mode Only.
3: Ringing Day and Night.
s the SOFTWARE LINE APPEARANCE to a programmable
S-33
Page 709
Advertisement
Table of Contents
