Table of Contents
Advertisement
C-50
Operating Procedure (cont'd)
3.
Station A dials the number for B; receives ringback tone. Station B is rung.
Note 1:
The status of Station A can be restored to normal with a switch hook flash in one of the following cases:
When Station A has received busy tone.
When Station B is under a call restriction or when Station A cannot access Station B for some other reasons.
When Station B does not answer the call.
4.
Station B answers the call
B that a call is being transferred to B.
(i) If Station A hangs up before Station B answers the call; Station B is rung continuously; Station C
Note 2:
receives ringback tone.
(ii) Station B answers the call; Stations B and C are connected with each other.
Page 852
Call Transfer - All Calls - CCIS
HT
RBT
STN (a)
[Node A]
Note 2
; Stations B and A are connected with each other. Station A tells Station
HT
STN (a)
[Node A]
STN (a)
[Node A]
Hold Tone
STN (c)
[Node C]
RBT
RG
CCIS
[Node B]
Hold Tone
STN (c)
[Node C]
CCIS
[Node B]
RBT
STN (c)
[Node C]
RBT
RG
CCIS
[Node B]
Note 1
STN (b)
STN (b)
STN (b)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
