NEC NEAX2400 IPX Programming Manual page 957

Feature programming manual
Hide thumbs Also See for NEAX2400 IPX:
Table of Contents

Advertisement

E-9
E-9
General Description
This feature provides an LCD display of the time elapsed while a D
network.
Operating Procedure
No manual operation is required.
Service Conditions
1.
The elapsed time is displayed in the eight left-side positions of the LCD display.
2.
The elapsed time can reach a maximum of 9 hours, 59 minutes and 59 seconds, after which the clock
returns to zero.
3.
A continuous time display will occur during CONSULTATION HOLD - ALL CALLS - CCIS [C-58],
THREE-WAY CALLING [T-2], EXCLUSIVE HOLD - D
term
D
[N-7D].
4.
When a call is transferred, the elapsed time of the party receiving the transfer begins at zero.
term
5.
When the D
CALL HOLD [C-6] [C-6D], the elapsed time begins at zero.
6.
The elapsed time is not displayed when the station is in a specific condition, such as:
a.) three-way conference
b.) connecting to trunk with a held trunk.
Programming
No programming is required.
Page 914
Elapsed Time Display - CCIS
Elapsed Time Display - CCIS
returns to the original call from CALL TRANSFER - ALL CALLS - CCIS [C-50] or
term
is connected to any trunk through the CCIS
term
[E-4D] and NON-EXCLUSIVE HOLD -
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1

Advertisement

Table of Contents
loading

Table of Contents