Table of Contents
Advertisement
C-28
General Description
This feature allows a call, which originates from a station or trunk and is destined for a station, to be routed to another
station outside the NEAX2400 IPX via the appropriate trunk line. This feature can also be activated from a D
multi-line.
Operating Procedure
To set
1.
Lift the handset; receive dial tone.
2.
Dial the CALL FORWARDING - ALL CALLS - OUTSIDE access code (same as CALL
FORWARDING - ALL CALLS [C-5]); receive special dial tone.
3.
Dial the desired target telephone number (or Speed Calling access code and abbreviated code). If the
ATTENDANT CONSOLE [A-3] is setting this feature, dial the access code, tenant number, originating
telephone number, and then the desired outside number; receive service set tone.
To cancel
1.
Lift the handset; receive dial tone.
2.
Dial the CALL FORWARDING - ALL CALLS - OUTSIDE cancel code, (same as CALL
FORWARDING - ALL CALLS [C-5] cancel code); receive service set tone.
To set from a multi-line D
1.
Press the multi-line feature key to be used for CALL FORWARDING - ALL CALLS - OUTSIDE.
2.
Lift the handset or press the SPEAKER key; receive dial tone.
3.
Press CALL FORWARDING - ALL CALLS - OUTSIDE feature key; receive special dial tone.
4.
Dial the desired target telephone number (or Speed Calling access code and abbreviated code); receive
service set tone. The LED will light. The LCD displays:
5.
Replace the handset or press the SPEAKER key.
To monitor from a multi-line D
1.
Press the multi-line appearance, then press the CALL FORWARDING - ALL CALLS FORWARD
feature key. The LCD displays:
*A dialed abbreviated number is transferred into the forwarding number, and the first eight digits are
Note:
displayed, even if a maximum of 24 digits can be stored.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Forwarding - All Calls - Outside
Call Forwarding - All Calls - Outside
term
FORWARD SET
(Time Display)
term
FORWARD
(Time Display)
Outside Number*
XXXXXXXX
C-28
term
Page 203
Advertisement
Table of Contents
