Table of Contents
Advertisement
Service Conditions (cont'd)
6.
CALL FORWARDING - ALL CALLS - D
CALLING-ONE TOUCH [S-26D]. If this feature is accessed via the dial pad, it must also be cancelled
via the dial pad.
7.
A user may set CALL FORWARDING - ALL CALLS - D
CLASS OF SERVICE - INDIVIDUAL [C-15] assigned to the station setting the service. The figure below
is a simplified key sheet assignment for stations 200 & 201. The CLASS OF SERVICE - INDIVIDUAL
[C-15] for station 200 is allowed CALL FORWARDING - ALL CALLS - D
SERVICE - INDIVIDUAL [C-15] for station 201 is not. Station 200 is able to set CALL FORWARDING
- ALL CALLS - D
FORWARD
FORWARD key is same as the CALL FORWARDING - ALL CALLS feature key.
Note:
8.
This feature is applicable to CALL FORWARDING - ALL CALLS - OUTSIDE [C-28] and CALL
FORWARDING and MULTIPLE CALL FORWARDING - ALL CALLS - CCIS [C-45] [M-40].
9.
The display of an intermediate station on a D
system data. This assignment is done on a system basis. The LCD displays:
When the telephone number of the intermediate or calling/called station exceeds 8 digits, the last 8 digits
Note:
are displayed. However, a maximum of 16 digits calling/called telephone number can be displayed on the
middle line of LCD depending on the system data.
10.
When the user setting CALL FORWARDING - ALL CALLS goes off-hook, the special dial tone can be
provided instead of dial tone. (Activation of this service is determined in the system data.)
11.
The OAI monitor number and the ACD pilot number cannot be assigned as the Call Forwarding target
telephone number except when called from a station or Tie Line trunk.
12.
When a destination of CALL FORWARDING - ALL CALLS - D
the feature is restricted by the new office data or by changing of the DAY/NIGHT mode, the assigned data
can still be used or cancelled.
13.
A telephone number must be set to the call forwarding destination.
14.
This feature is not available for stations having a telephone number of seven digits or more.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Call Forwarding - All Calls - D
term
for station 201. The associated feature button LED on station 201 will illuminate.
Station 200
201
200
MY LINE
MULTI-LINE
Intermediate Station
CF ALL XXXX
(Time Display)
term
term
may also be accessed via the dial pad or SPEED
term
for a multi-line appearance based on the
FORWARD
term
's LCD panel may be allowed or denied according to
Calling/Called Party
XXXX
term
term
, but the CLASS OF
Station 201
200
201
MY LINE
MULTI-LINE
has already been assigned, even if
C-5D
Page 135
Advertisement
Table of Contents
