Table of Contents
Advertisement
D-91
D-91
Dialed Number Display - Recall - CCIS
General Description
When the Attendant Console makes an outgoing call to a CCIS line by means of a tandem connection, and the
Attendant has left the call by pressing the RELEASE button before the called Party answers, the Attendant Console
will be recalled if the Called Party does not answer. This service feature changes the display, when the Recall is
answered, from Route and Trunk to Dialed Number.
Operating Procedure
1.
Subscriber (a) and the Attendant in Node A are engaging in a call through a DID line.
2.
The Attendant dials the number for Station (b); receives ringback tone. Subscriber (a) receives Hold Tone,
and Station (b) is rung (Distinctive Ringing).
PUBLIC
SWITCHED
TELEPHONE
NETWORK
3.
The Attendant presses the RELEASE key; Subscriber (a) receives ringback tone.
SWITCHED
TELEPHONE
NETWORK
Page 908
Dialed Number Display - Recall - CCIS
PUBLIC
ATT
SWITCHED
TELEPHONE
NETWORK
DID
Subscriber (a)
RBT
ATT
Hold Tone
DID
[Node A]
HT
Subscriber (a)
PUBLIC
ATT
DID
RBT
Subscriber (a)
CCIS
[Node A]
RBT
CCIS
[Node B]
RBT
CCIS
[Node A]
[Node B]
STN (b)
[Node B]
RG
Distinctive
Ringing
STN (b)
RG
STN (b)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
