Table of Contents
Advertisement
B-10
General Description
This feature provides a hotline function between two stations at different nodes in the CCIS network, using a line/
term
feature key of a D
.
Operating Procedure
term
To access from a D
1.
Lift the handset or press the SPEAKER button.
2.
Press the line/feature key associated with a predetermined station in another office. The destination station
is automatically dialed; ringback tone is heard; the destination station answers.
3.
After conversation is completed, hang up or press the RELEASE key.
4.
To immediately make another BROKERAGE HOTLINE - CCIS call, press another line/feature key
associated with another station without going off-hook.
Service Conditions
1.
A 16-button D
but fewer than 39 destinations. In this case, one of the 16-line buttons of the D
MY-Line. The RELEASE button on the 24-button Add-On Module can be used as the RELEASE key.
Therefore, a maximum of 39 BROKERAGE HOTLINES - CCIS can be used to access distant
destinations.
2.
Two 16-button D
destinations are required. One of the 16 buttons on each D
remaining 15 buttons on the D
BROKERAGE HOTLINES - CCIS can be used to access distant destinations.
3.
An AC Adapter is required for the 24-button Add-On Module.
4.
A BROKERAGE HOTLINE cannot be assigned to a Hunt group or UNIFORM CALL DISTRIBUTION
[U-1] group.
5.
When a BROKERAGE HOTLINE - CCIS call is made, the D
number but does not show the SERVICE DISPLAY - CCIS [S-53] of the BROKERAGE HOTLINE.
6.
The MY-Line of a D
7.
The destination, by definition, must be a station or an Attendant Console at a different node in the CCIS
network.
8.
When the destination is an Attendant Console, the BROKERAGE HOTLINE - CCIS call terminates at an
ATND key.
9.
ATTENDANT CAMP-ON WITH TONE INDICATION [A-1] [A-45], CALL BACK [C-1] [C-44], and
EXECUTIVE RIGHT-OF-WAY [E-1] [E-8] can be prohibited to the BROKERAGE HOTLINE - CCIS
connection through CLASS OF SERVICE-INDIVIDUAL [C-15].
10.
When a destination station is busy, CALL BACK - CCIS [C-44], CALL WAITING-ORIGINATING [C-
31], EXECUTIVE RIGHT-OF-WAY - CCIS [E-8], and MESSAGE REMINDER - CCIS [M-34] [M-
34D] can be activated.
11.
If the destination station is busy and is a member of a Hunt Group, the appropriate station hunting feature
([S-7] [S-8] [S-9]) will be activated.
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Brokerage Hotline - CCIS
Brokerage Hotline - CCIS
term
with a 24-button Add-On Module attached is used for applications requiring at least 15
term
s connected via a 24-button Add-On Module are used if between 40 and 52
term
s must be assigned as a RELEASE key. Therefore, a total of 52
term
cannot be assigned as a BROKERAGE HOTLINE - CCIS.
term
term
must be assigned as a MY-Line. One of the
term
display shows the destination telephone
B-10
must be assigned as the
Page 819
Advertisement
Table of Contents
