Table of Contents
Advertisement
R-54
Service Conditions (cont'd)
5.
Each target station must be a PB (DTMF) telephone.
6.
This feature is restricted when:
•
A wrong ID code is dialed from the target station.
•
The forwarding features from the designated station are restricted by Service Feature Class.
7.
Normally, a maximum of 12 digits can be dialed as a Call Forwarding destination number. However, the
maximum number of digits assigned by CALL FORWARDING - EXTERNAL RESTRICTION [C-131]
takes precedence over the default setting.
8.
When changing a target station number, the former setting must be cancelled in advance.
9.
When the forwarding station is in one of the following conditions, this service cannot be activated.
•
Busy
•
Lockout
•
Make Busy
•
Not assigned
10.
The target station must not have any other call placed on hold when setting this feature.
11.
When this feature is set from an outside station, DID [D-7] connection is required.
12.
This feature can be activated via REMOTE ACCESS TO SYSTEM [R-2] or AUTOMATED
ATTENDANT [A-82].
Programming
STEP 1:
ASYD- System Data 1, Index 79, Bit 2. Split Call Forwarding.
0/1 = Out/In Service. Assign data "1".
STEP 2:
ARTD - Assign route class data of the trunk for SPLIT CALL FORWARDING.
CDN: 68 (SCF) = 1
STEP 3:
ANPD - Reserve number levels for each forwarding feature, ID Number Entry, and Remote Call
Forwarding Control access codes. Assign Connection Index of Normal service to each number level.
Assign NND according to the predetermined numbering plan.
STEP 4:
ASPA - Assign the access codes for the following features.
TN:
Tenant Number
ACC: Access Code
SRV:
STN (Remote Call Forwarding Control)
SRV:
SSC
SRV:
SSCA SIDA: 100 (ID Number Entry)
Page 638
Remote Call Forwarding Control
SID:
8
(Call Forwarding - All Calls set)
9
(Call Forwarding - All Calls cancel)
10
(Call Forwarding - Busy Line set)
11
(Call Forwarding - Busy Line cancel)
12
(Call Forwarding - Don't Answer set)
13
(Call Forwarding - Don't Answer cancel)
86
(Split Call Forwarding - All Calls set)
87
(Split Call Forwarding - Busy Line set)
88
(Split Call Forwarding - Don't Answer set)
89
(Split Call Forwarding - All Calls cancel)
90
(Split Call Forwarding - Busy Line cancel)
91
(Split Call Forwarding - Don't Answer cancel)
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
