Table of Contents
Advertisement
B-5D
Service Conditions (cont'd)
4.
This feature must be allowed in CLASS OF SERVICE - INDIVIDUAL [C-15] via system data
programming.
5.
BOSS-SECRETARY OVERRIDE is denied if the boss is connected to the ATTENDANT CONSOLE.
6.
If provided in the system, the held caller will hear MUSIC ON HOLD [M-7].
7.
The call is recorded in SMDR for the secretary's station (e.g., 201).
8.
This feature is denied to a UCD [U-1] group.
9.
BOSS-SECRETARY OVERRIDE [B-5] overrides DO NOT DISTURB [D-11D] if set for the boss.
10.
BOSS-SECRETARY OVERRIDE [B-5] is denied under the following conditions:
ATTENDANT CAMP-ON WITH TONE INDICATION
ATTENDANT OVERRIDE
BUSY VERIFICATION
CALL BACK
CALL HOLD
CALL TRANSFER
CALL WAITING - ORIGINATING
CALL WAITING - TERMINATING
CONSULTATION HOLD - ALL CALLS
DATA LINE SECURITY
DATA PRIVACY ON DEMAND
DIAL ACCESS TO ATTENDANT
EXCLUSIVE HOLD - D
EXECUTIVE RIGHT-OF-WAY
NON-EXCLUSIVE HOLD - D
OFF-HOOK QUEUING
OUTGOING TRUNK QUEUING
PRIVACY - D
PRIVACY RELEASE
THREE-WAY CALLING
VOICE CALL - D
11.
FCCS link is not available for this feature.
Programming
STEP 1:
ASYD - System Data 2, Index 1, bits 0 & 1. Consultation Hold allowed or denied. 00: denied; 01:
Originating and Terminating Calls allowed, Tandem Call Denied; 11: All calls allowed.
System Data 2, Index 10. Assign data 10H to enable CALL WAITING ORIGINATING [C-31]
service.
STEP 2:
ANPD - Reserve a number level for service feature access. Assign for a Connection Status Index of
Normal (N), Hooking (H), and Busy (B). Assign NND in accordance with a predetermined numbering
plan.
STEP 3:
ASPA - Assign an access code to CALL HOLD set, SID = 1 for Connection Status Index (CI) of
Hooking (H). Assign an access code to CALL WAITING - ORIGINATING [C-31] service. SRV =
SSC (Service Code), SID = 5. Assign for a Connection Index of Normal (N) and Busy (B).
Assign an access code to BOSS-SECRETARY OVERRIDE Tone, SRV = SSCA (Service Code
Appendix), SIDA = 53. Assign for Connection Status Index of Normal (N) and Hooking (H).
STEP 4:
ASFC - Assign station to receive BOSS-SECRETARY OVERRIDE [B-5] a feature class that allows
the following SFI's: 5, 6, 10, 11, and 51. Assign these SFI's as data "1".
Page 86
Boss - Secretary Override - D
term
term
term
term
term
[A-1]
[A-7]
[B-3]
[C-1]
[C-6, C-6D]
[C-10] [C-11, 11D] [C-50] [C-54]
[C-31]
[C-12]
[C-17, C-17D] [C-58]
[D-12] [D-66]
[D-17] [D-68]
[D-2] [D-71]
[E-4D]
[E-1, E-1D]
[N-7D]
[O-7]
[O-2, O-2D]
[P-14D]
[P-18]
[T-2, T-2D]
[V-2D]
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
Advertisement
Table of Contents
