Table of Contents
Advertisement
M-19
Service Conditions (cont'd)
11.
When the call is in the UCD queue, the MESSAGE REMINDER service is not provided.
12.
A maximum of 32 digits can be saved at the called party.
13.
To memorize the telephone number of the calling station, assign SYS1, index 641, b0=1 by the ASYDN
command.
Programming
STEP 1:
ASYD - System Data 1, Index 17, Bit 0.
Single-line stations able to use VOICE CALL [V-2D] and MESSAGE REMINDER features to a D
while hearing ringback tone? 0/1: Restricted/Allowed.
System Data 1, Index 80, bit 1. Key for message cancel? 0/1: "#" key / "*" key.
STEP 2:
ASFC - Assign the single-line stations a feature class that allows SFI: 53, Message Reminder.
STEP 3:
ANPD - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy
(B). Assign NND in accordance with predetermined Numbering Plan.
STEP 4:
ASPA - Assign an access code to Message Reminder; assign SRV = SSCA (Service Code Appendix),
SIDA = 42; assign Hooking (H), and Busy (B).
FCCS Programming
This data setting describes only the additional or replacement commands used to activate FCCS
services. When used as an FCCS feature, these commands replace the non-network commands (for
example, AAED is replaced by AAEDN). Note that the data setting for FCCS service varies depending
on the node.
STEP 1:
ANPDL - Reserve a number level for feature access. Assign for Normal (N), Hooking (H), and Busy
(B). Assign NND in accordance with predetermined Numbering Plan.
STEP 2:
ASPAL - Assign an access code to Message Reminder; assign SRV = SSCA (Service Code
Appendix), SIDA = 42; assign Hooking (H), and Busy (B).
Note:
When using ASYDL or ASYDN to program an FCCS feature, the basic programming of ASYD is required
in addition to ASYDL or ASYDN.
Page 482
Message Reminder
Note
NEAX2400 IPX Feature Programming Manual
NDA-24297, Issue 1
term
Advertisement
Table of Contents
